Collective Presetting Of Stations (Auto Memory) - Kenwood R-K701 Instruction Manual

Receiving broadcast station

Collective presetting of stations (AUTO MEMORY)

1 Press the MODE key.
2 Select "AUTO MEMORY" by pressing the
4 / ¢ key.
3 Press the ENTER key.
ENTER
26
EN
3. Tuning (Preset Call)
÷ If radio stations have already been stored with AUTO MEMORY (Auto
memory function) or manual presetting, select a station using the 4 /
¢ key. Each press of the key switches the preset stations in sequence.
The indicator TUNED lights up when a station is received.
The indicator ST. lights up during stereo reception.
When the ¢ key is pressed : P1=P2=P3 ... P38=P39=P40=P1...
When the 4 key is pressed : P40=P39=P38 ..... P3 =P2 =P1=P40.....
÷ When a key is held down, preset stations will be skipped at intervals of
about 0.5 seconds.
÷ To select a preset station from the remote, use the P.CALL 4 / ¢ key
or the Numeric keys on the remote control unit.
MODE
TUNED ST. AUTO
L
FM
30 10 5 3 1 0 (-dB)
R
MHz
Up to 40 stations can be memorized.
÷ For use of the RDS function, stations must be memo-
rized by AUTO MEMORY.
÷ RDS stations are given priority during auto presetting.
If there is memory left after presetting, this unit con-
tinues presetting regular FM and AM stations.
÷ A broadcast station that cannot be preset with AUTO
MEMORY should be set with Manual preset.
1 2 3 4 5
1 2 3 4 5
L
30 10 5 3 1 0 (-dB)
R