Combining Two Tracks (Combine) - Kenwood HM-383MD Instruction Manual

Combining two tracks
The following procedure shows you how to combine two tracks into a single track. It is also possible to
combine more than two tracks or a piece of music composed of several tracks into a single track. After the
two tracks have been combined, the track numbers after them will be adjusted automatically.
Before starting MD editing, be sure to cancel the pro-
gram mode by pressing the PGM key in stop mode.
Execute operation in play or pause mode.
1
Play the first of the two tracks to be combined.
÷ The track selected in step 3 will be appended at the end of the track selected in step 1.
2
Select " 3 COMBINE ?".
1
Press the TRACK EDIT key repeatedly until "3
COMBINE ?" is selected. (Pressing the key in
the middle of playback initiates pause)
TRACK EDIT
2
Set it.
3
Select the second of the tracks to be combined.
1
Select the track number.
4
To decrease
track No.
2
Set it.
4
Execute the track combine operation.
ENTER
5
After execution, press the 0 MD key to eject the disc.
(COMBINE)
SET
P.CALL
¢
To increase
track No.
SET
It is not permitted to combine two tracks which are
recorded in different recording modes.
Each press switches the operation.
1 "3 DIVIDE
?"
2 "3 COMBINE ?"
3 "3 ERASE
?"
4 "3 MOVE
?"
5 The "MD-EDIT" indicator is turned off
(Cancel MD edit mode)
C O M B I N E
÷ To cancel the operation in the middle, press the
TRACK EDIT key any time before step
0 0 3 + 0 0 5
Current track
2 3 4
1
A B C D
1 2 3
A B C+E
Track No. and title of the first track are left. (Track
No. and title of the second track are cleared.)
Display after execution
"EDIT NOW" = "COMPLETE !"
(When editing is completed successfully)
"EDIT NOW" = "CAN' T EDIT !"
(When editing is impossible)
MD Edit Functions
?
4
.
Next track
?
5 6
E F
4 5
D F
59