Collective Presetting Of Stations; Channel Space Setting - Kenwood HM-636 Instruction Manual

Collective presetting of stations

AUTO MEMORY ..... For Europe
AUTO PRESET ........ For other countries
Main unit only
1
Select the tuner input.
2
Select "AUTO MEMORY ?"
(or "AUTO PRESET ?").
\
\

Channel space setting

The space between radio channels has been set to the one that prevails in the area to which the system is shipped.
However, if the current channel space setting does not match the setting in the area where the system is to be used,
for instance when you move from area 1 or area 2 shown in the following table or vice versa, proper reception of AM/
FM broadcasts cannot be expected. In this case, change the channel space setting in accordance with your area by
referring to the following table.
Main unit only
1
Turn power on.
2
While holding TUNER/band key pressed,
turn the volume knob to select "FM 50 k" or
"FM 100 k".
3
Set it.
\
\
(Except for Europe and Australia)
÷ A maximum of 30 stations of the band presently being
received will be preset.
÷ When there are many stations and the intended sta-
tion has not been preset, please also use "One-by-one
presetting (Manual preset)".
Each press switches the space frequency alter-
nately.
1 FM 50 k
2 FM 100 k
÷ At FM 50 kHz, the corresponding AM frequency is 9 kHz.
At FM 100 kHz, the corresponding AM frequency is 10 kHz.
Area
USA, Canada and South
1
American countries
2
Other countries
Receiving broadcast station Playback of TAPE
CHANNEL
Space Frequency
FM: 100 kHz
AM: 10 kHz
FM: 50 kHz
AM: 9 kHz
21
EN