Kenwood HM-383MD Instruction Manual page 49

3
Program the desired sequence of CD tracks.
Perform steps 1 and 2 of the procedure in
"Listening to the desired sequence (Pro-
gram playback)". ‡
4
Start recording.
1
Press the menu key.
2
Turn the volume/multi control knob to se-
lect "REC OPTIONS", then press the set/
demo key.
3 Turn the volume/multi control knob to
=
select "CD MD", "CD
"TWIN REC", then press the set/demo
key to start recording.
If you want to control step 4 from the remote,
simply press the MD O.T.E. or TAPE O.T.E. key
once to start recording.
To interrupt a recording
(Recording and playback will be stopped)
=
TAPE" or
7
stop
Tuning
Mode
Convenient recording methods
÷ When the PGM key is pressed to cancel the ed-
ited contents, the entire editing contents will be
°
erased.
÷ Tracks programmed beyond the available MD or tape
recording time will be interrupted in the middle.
Turning the knob switches the display contents.
1 "CD = MD" :
Select to record a CD onto MD.
2 "CD = TAPE" :
3 "TWIN REC" :
Select to record a CD onto both
MD and tape.
÷ Recording starts from the first track in the pro-
gram and ends after having recorded the entire
programmed tracks.
÷ Recording stops automatically when the program
playback of CD has completed.
÷ When either the playback of CD or recording of MD or
tape is stopped, the other operation is stopped auto-
matically.
At the end of the recording
MD recorder : Stop.
Cassette deck : Stop is executed after an unre-
corded portion of about 4 sec.
has been produced.
Do not turn power off or apply shock or impact
while "MD WRITING" is displayed. If the power cord
is unplugged before "MD WRITING" disappears, the
recorded or edited data will be lost.
Select to record a CD onto tape.
49