Listening To An Aux Input Source - Kenwood HM-383MD Instruction Manual

Listening to an AUX input source

1
Select AUX (external input).
2
Play the connected equipment.
3
Adjust the volume.
Adjusting the AUX Input Level
This adjusts the input level for the external equipment (video deck etc.) connected to the AUX input terminal.
Adjust so that the volume of the AUX input source sounds at an equivalent level to the CD or MD. (Main
unit operation only)
1
Press the AUX key.
2
Select "AUX INPUT ?".
menu
\
\
(Press the set/demo key while the "?" mark is blink-
ing.)
3
Adjust the input level.
The level
decreases
4
Set it.
set / demo
AUX
volume / multi control
volume / multi control
set / demo
\
\
volume / multi control
The level
increases
A U X
Turning the knob switches the display contents.
"T A P E R V S . ? "
"MD REC MODE "
"REC SPEED ? "
"REC OPTIONS"
"AUTO PRESET" or "AUTO MEMORY"
(Only when the TUNER input is selected)
"A U X I N P U T ? "
(Only when the AUX input is selected)
"T I M E R S E T ? "
"A . P . S . S E T ? "
L E V E L
÷ Adjustment is possible over the range from - 5 to + 2.
÷ Adjusting the input level control also varies the record-
ing level from the input source connected to the AUX
input jacks.
69
Timer operation
- 2
Input level