Table of Contents
Advertisement
48
Program recording
Desired CD tracks can be programmed in the desired sequence and recorded onto an MD or tape.
The tape deck of the unit can record signals only on Normal (Type ) and High (Type ) tapes. It cannot record on
Metal (Type
) tapes.
Make sure to put the MD recorder or cassette deck to stop mode.
1
Make preparation for recording.
1
Select the CD input.
2
Ensure that the "RANDOM" indicators are not lit.
3
MD
: Insert a recordable MD in the MD recorder.
TAPE : Perform steps 1 to 3 of the procedure in "Recording on TAPE". ›
4
Insert the desired CD in the CD player.
5
Ensure that the "HIGH-SPEED" indicator is not lit. w
Even when the "HIGH-SPEED" indicator is lit, the MD recording is performed as normal-speed
recording.
÷ If the "RANDOM" indicator is lit, turn it off by pressing the RANDOM key to cancel the random play mode.
÷ If the "HIGH-SPEED" indicator is lit, turn it off by setting the recording speed to the normal speed.
To record a CD only onto tape, go to step 3.
2
Select the recording mode.
1
Press the menu key.
2
Turn the volume/multi control knob to se-
lect "MD REC MODE", then press the set/
demo key.
3
Turn the volume/multi control knob to se-
lect the recording mode, then press the
set/demo key.
volume / multi control
(If you selected "STEREO" or "MONO", go to
step 3.)
4
To use the LP stamping function, turn
the volume/multi control knob to set
"LP: STAMP on", then press the set/
demo key.
(CD = MD / CD = TAPE / TWIN REC)
menu
set / demo
\
\
Convenient recording methods
Discs or tracks recorded in the LP2 or LP4 mode will
produce no sound if they are played back on a player
which is incompatible with the LP2 or LP4 mode. When
a disc is expected to be MDLP-incompatible players,
record it in the STEREO or MONO mode.
Turning the knob switches the display contents.
1 "STEREO" : Stereo recording mode
2 "LP2" : Stereo LP2 recording mode
3 "LP4" : Stereo LP4 recording mode
4 "MONO" : Monaural recording mode
Turning the knob switches the display contents.
1 "LP: STAMP on" :
at the beginning of each track title.
2 "LP: STAMP off" :
put at the beginning of each track title.
Characters "LP:" are input
Characters "LP:" are not in-
Advertisement
Table of Contents
