Menu − Network; Usb Wi-Fi Adapters; Network Help Button; Connecting To A Facility's Network - QSC MP-M80 User Manual

Menu − Network

USB Wi-Fi adapters

For short range applications with fewer potential sources of interference, an optional USB adapter, supplied by QSC, and available at – https://parts.
qsc.com/cp-000033-00. No other USB Wi-Fi adapters have been qualified for use with the MP-M. Be aware that its range and connection reliability
will be limited compared to an external Wi-Fi router.
If the optional QSC USB Wi-Fi adapter is installed, the mixer automatically creates its own network on power up. The factory-default network name
will be "MPM-" followed by a random number. The mixer's factory-default local network password is 1234509876.

Network Help button

Reset MP-M Network settings – Press the Network Help button to display the following information: If network connectivity is lost, it may be
necessary to restore network settings to factory default values.
1. Push and hold the pinhole reset button (located to the right of the MFC jacks) for 10 seconds to reset the MP-M network settings.
2. After 10 seconds, release the button and the fan will run briefly to indicate that this step is complete.
3. Power cycle the MP-M. To power cycle the MP-M, disconnect and reconnect AC power to the MP-M.
4. The MP-M network connection is reestablished.

Connecting to a Facility's Network

Networks in commercial facilities have been set up by IT professionals who are concerned about security. They may be very reluctant to allow you
to connect a mixer to their network. But if they do, they will want to know two things.
1. What port do you want them to give you? Answer – any open port will work. The mixer will find it.
2. What services do you need? Answer – none. The mixer implements zero-configuration networking using Bonjour .
®
TD-001578-01-C 51