Menu - Scheduling - QSC MP-M80 User Manual

Menu – Scheduling
The Scheduling screen is used to set up scheduled recall
of scenes. Each scheduled recall is known as an Event.
This function is also supported in MP Manage if enabled
by the installer.
NOTE!: Scheduling depends on the internal
clock of the MP-M being set to the correct
time. If the MP-M is connected to the
Internet, its internal clock will be automatically
updated. If it is not connected to the Internet,
the clock may be set to match the time of a
connected device from the settings screen.
1. button – Touch this button to create a new
New Event
scheduled event.
Left Side of Screen
2. Event List – Displays a scrollable list of events
3. Event Name – The user-defined event name
4. Start – Frequency and start time of the event
5. Active – Green is active, red is inactive
Right Side of Screen
6. Event Name field – Touch to enter a name for the
event.
7. Active switch – Activates or deactivates the event
without changing any of the event settings.
8. Start Date button – Displays a pop-up to set the date
when the event is to occur for the first time.
9. Start Time button – Displays a pop-up to set the time
of day the event is to occur.
10. button – Displays a pop-up with a list of
Load Scene
available scenes.
11. button – Displays a pop-up to set the date
End Date
on which the event will no longer occur.
12. button – Displays a pop-up to select when the
Repeat
event repeats. Options are:
a. – one-time event
No Repeat
b. – seven days per week
Daily
c. – Monday – Friday
eekdays
d. eekly – one time per week beginning on the
Start Date
e. eekends – Saturday and Sunday only
13. Delete button – Deletes the selected Event.
TD-001578-01-C
2
3 4 5
8
45
Touch
Menu
1
6
7
8
9
10
11
12
13
9 10
11 12
Touch
Scheduling