Menu – Wireless Network Setup: Create New Network
MP-M
QSC Dongle
IMPORTANT!:
Requires the USB Wi-Fi adapter (QSC Part # cp-000033-00)
Create New Network
using a USB Wi-Fi dongle
provides short range wireless communication (1) between
the MP-M and Android and/or iOS devices (2) with the
MP Install (3) or MP Manage (4) app installed.
If the optional QSC USB Wi-Fi adapter is installed, the
mixer automatically creates its own local network on
power up. The factory-default local MP-M network name
is "MPM-nnnn" ("nnnn" is a random number.) The mixer's
factory-default local network password is1234509876.
1.
Mixer Name
– Enter a name for the MP-M Mixer.
Press Enter to confirm the change.
2.
Network Type
– Set to
3. Select
Create New Network
4.
Set Password
– Enter a ten-digit (numerical)
password. Press Enter to confirm the change.
IMPORTANT!:
Make sure changes are
confirmed for all text fields by pressing Enter
while the cursor is in the field.
5.
– Touch to configure the mixer according
Apply
to the network settings. Remote devices may now
join the mixer's local network using the
Name
and Password. Refer to the remote device
manufacturer's instructions for joining networks.
This step may take several minutes.
NOTE!:
The devices can now connect to the mixer via the mixer's network.
• A device connects to the mixer's network in the device's Wi-Fi settings using the mixer's SSID (name) and password. Refer to the remote device
manufacturer's instructions for joining networks.
• When the device is connected to the mixer's network, follow instructions to logon to the MP-M.
TD-001578-01-C
3
1
2
MP Install
4
MP Manage
APPS
ireless.
Mixer
4
2
MP
Manage
APPS
1
3
4
5
54
Touch
Touch
Menu
Network
2