Menu - Wired Network Setup: Auto Ip Address - QSC MP-M80 User Manual

Menu – Wired Network Setup: Auto IP Address
1
MPM Ethernet Switch
1 = wired Ethernet connection (RJ-45 connectors)
2 = wireless connection established between a wireless device and the wireless router
3 = MP Install running on PC and tablet device (MP Manage not available on a PC.)
4 = MP Manage running on a smart phone and tablet device (MP Install not available on a smart phone.)
connection – when an MP-M is wired
ired Ethernet
to an Ethernet network (1) with DHCP enabled, the MP-M
attempts to automatically obtain an IP address. If this isn't
possible, the MP-M auto-assigns a link-local IP address.
The mobile devices join the network via the wireless
router (2). (Refer to the manufacturer's instructions for
devices (iOS, Android) connecting to a network.)
Once an IP address is established for the MP-M, and
the devices with MP Install or MP Manage installed are
connected to the network, the MP Install app and the
MP Manage app can connect to the MP-M using the
default passwords "Admin" (3) for MP Install and "Access"
(4) for MP Manage. A strongly worded message displays
encouraging the integrator to change the network and
mixer passwords along with fields to enter the new
passwords.
1. – Enter a name for the mixer. Press
Mixer Name
Enter to confirm the change.
2. – Set to Wired.
Network Type
3.
ired Network Settings
4. – displays the IP Address
Assigned IP Address
supplied by the DHCP or the link-local address if the
DHCP did not provide an address.
5. – Displays the current status of the connection between the MP-M and the wireless router. Some possible readings are:
Connection Status
Connected, Not Connected, Searching
IMPORTANT!: Make sure changes are confirmed for all text fields by pressing Enter while the cursor is in the field.
6. Apply – Touch to configure the mixer according to the network settings. A message "Wired Ethernet connection operational" displays.
NOTE!: This step may take several minutes.
7. Touch Okay
The devices can now connect to the mixer via the wireless router.
• A device connects to the wireless router in the device's Wi-Fi settings using the router's SSID (name) and password. Refer to the remote device
manufacturer's instructions for joining networks.
• When the device is connected to the wireless router, follow instructions to logon to the MP-M. .
TD-001578-01-C
1
Wireless Router
DHCP Enabled
– Auto IP Address (DHCP)
3
2
1
MP
Install
Manage
1
3
4
5
6
52
4
3
2
MP Install
MP
4
MP Manage
APPS
APPS
Touch
Menu
2
9
Touch
Network