Output − Music On Hold (Moh) - QSC MP-M80 User Manual

Output − Music On Hold (MoH)
The MP-M has the ability to route an input signal to a
dedicated Music on Hold output that can be connected to a
telephone system.
Note that the MoH output audio bandwidth has been
deliberately limited to reduce distortion that may
occur if excessive low-frequency signal is sent to a
telephone system.
1. Select Source – Touch a source from the
scrollable list.
2. Adjust the level control to the desired output level.
TD-001578-01-C
Touch
Outputs
1
25
Touch Touch
Music On Hold Setup
Music On Hold
2