Output Zone − Navigation & Master Controls; Output Zone Navigation Icons; Output Zone Master Controls - QSC MP-M80 User Manual

Output Zone − Navigation &
Master Controls

Output Zone Navigation Icons

The icons at the top of the screen display when you select
a channel. Use these to navigate to other processing
blocks for the output channel. These icons remain visible
when an output channel-processing block is selected.
1. – The Setup screen provides controls to change
Setup
the channel name, link channels, set Channel Safe and
set the delay.
2. Overview – The Overview screen displays and
provides controls for most of the settings for the
selected channel.
3. Sources – The Sources screen provides controls
to select the sources and their priority for the
selected channel.
4. – The Speakers screen provides controls
Speakers
to select, recall, save custom settings, and sets which
parameters of a preset to recall.
5. – The GEQ screen provides a 28 band GEQ and
NEQ
an RTA display.
6. Anti FB – The Anti-Feedback screen provides controls
to set automatic anti-feedback, or manual kill, and provides a wizard for automatically finding feedback-prone frequencies.
7. Loudness – The Loudness screen provides controls to maintain a constant perceived tonal balance when the output level setting is adjusted.
8. – The Limiter screen provides controls to limit the output level.
Limiter
9. buttons – Navigates to adjacent channels. The overall movement is circular; when the last channel is reached, continue in the
Prev / Next
same direction to start over.

Output Zone Master Controls

To the right of the screen are the channel's Master controls and indicators. These controls remain visible no matter which output channel's
processing block is selected.
10. Zone label – Displays the name entered in the Setup Output Name field.
11. Cue – Sends the channel signal to the Cue headphone output.
12. Output Channel label – Displays the system number for the Output channel.
13. L – Indicates that the Limiter for the channel is engaged or not.
14. AF – Indicates that the Anti-Feedback Filters for the channel are engaged or not.
15. – Adjusts the output level of the channel.
Fader
16. – Indicates the channel signal level.
Meter
17. – Mutes and indicates mute status of the channel.
Mute
TD-001578-01-C
1 2 3 4
23
Touch
Outputs
5 6 7 8
12
13
14
16
Touch Setup
9
10
11
15
17