Menu − Gpi Setup; To Setup The Recall Conditions - QSC MP-M80 User Manual

Menu − NPI Setup
The General Purpose Input (GPI) is used to recall Scenes
using a (hardware) switch connected to the rear panel of
the MP-M. There are two GPIs.
To use the GPI, at least one Scene must exist.
In the diagram, the condition of
GPI 1 is open, and the condition
of GPI 2 is closed.
(or GPI 2
1. NPI 1 Open
Open) – Recalls the Scene
associated with the GPI
1 Open when the switch
attached to GPI 1 Open
is opened.
2. (or GPI 2
NPI 1 Close
Close) – Recalls the Scene
associated with the GPI
1 Close when the switch
attached to GPI 1 Open is closed.
3. Action Name – The name of the Scene to be recalled
when the condition of open or close is satisfied.
4. Disabled / Recall switch – Enables or disables the
selected condition.
5. – Resets the selected condition; no scene selected, and the Recall / Disabled switch to Disabled.
Reset
6. Recall Scene list – Displays the list of scenes created in the MP-M.

To Setup the Recall Conditions

a. Select one of the following: GPI 1 Open, GPI 1 Close, GPI 2 Open, or GPI 2 Close.
b. From the Recall Scene list, select a Scene to be recalled.
c. Set the Disabled / Recall switch to Recall.
TD-001578-01-C
GPI-1 GPI-2
1
2
3
6
48
Touch
Touch NPI
Menu
4
5