User Presets - QSC MP-M80 User Manual

User Presets

The User Preset screen is where custom user tunings and
presets are stored and managed.
1. button – Displays the Presets screen.
Presets
2. Save / Save as button – Touch to display a pop-up
message with details about the current Preset. Touch
OK on the pop-up to close.
If a Factory Preset is recalled, it
TIP!:
can then be saved as a user preset. This
can be used as a start on which to build
custom presets.
a. Save Preset As field – touch the field to access a
keyboard and enter a different name for the preset
or, leave the name as it is, and continue to the
next step.
b. Storage Location switch – Select either
MP-M Internal (on the mixer), or USB attached to
the mixer.
c. Save button – Touch the button to save the preset
in the selected location.
d. Cancel button – Touch the button to exit the dialog
without saving the preset.
3. Current Preset field – Displays the name of the currently active preset.
4. – Selects between the internal factory presets or user presets. User
Factory / User switch
presets may be stored and recalled to and from the MP-M internal memory or an attached
USB storage device.
5. – Allows selected parameters to be unaffected by a preset recall. The
Recall Omits
parameters that can be selected are: Levels, Name, 12V Phantom power. The parameter is
selected when the switch is "on".
6. Recall button – Touch to recall the preset selected in either the MP-M Internal, or the USB
External list.
7. – These windows (App Storage, MP-M Internal, and USB External) are
Selection windows
used to select a preset for recall and to copy presets from one location to another.
8. list - Displays any user presets stored in the internal memory of the device being used to control the MP-M. When this panel is
App Storage
selected, the Copy to MP-M button will copy the preset to MP-M internal memory. You cannot Recall a preset from App Storage. To Recall, save
the preset to MP-M Internal, then Recall.
9. list – Displays any user presets stored in the MP-M internal memory. When this panel is selected, the selected Preset can be
MP-M Internal
copied to either the App Storage or USB External. In addition, the Preset can be recalled, then be saved or saved as a different preset.
10. list – Displays any user presets stored on a connected USB device. When this panel is selected, the selected Preset can be
USB External
copied to the MP-M Internal storage. In addition, the Preset can be recalled, then can be saved or saved as a different preset.
One item in the App Storage list, MP-M Internal list, or the USB External list must be selected for the following controls to be available.
11. Copy To MP-M button – Touch to copy a selected preset from the App Storage to the MP-M Internal storage.
12. button – Touch to copy a selected preset from the MP-M Internal storage to the USB storage.
Copy to USB
13. Copy To App button– Touch to copy a selected preset from the MP-M Internal storage to the App Storage.
14. Copy to MP-M button– Touch to copy a selected preset from the USB External storage to the MP-M Internal storage.
15. button – Deletes the selected preset.
Delete
TD-001578-01-C
Inputs
1
2
4
7
8 9
11
13
15
11
Touch an Input Bank
Mic/Line
(RCA / More)
3
6
5
10
12
14
2a
2b
2c
Touch a Channel
Presets Button
2d