Menu - Gpi Setup - QSC MP-M80 User Manual

Menu − NPI Setup
The General Purpose Input (GPI) is used to recall Scenes
using a (hardware) switch connected to the rear panel of
the MP-M. There are two GPIs.
To use the GPI, at least one Scene must exist.
In the diagram, the condition of GPI
1 is open, and the condition of GPI 2
is closed.
1. NPI 1 Open (or GPI 2 Open) –
Recalls the Scene associated
with the GPI 1 Open when
the switch attached to GPI 1
is opened.
2. NPI 1 Close (or GPI 2 Close) –
Recalls the Scene associated
with the GPI 1 Close when the
switch attached to GPI 1 Open
is closed.
3. Action Name – The name of the Scene to be recalled
when the condition of open or close is satisfi ed.
4. Disabled / Recall switch – Enables or disables the
selected condition.
5. Reset – Resets the selected condition; no scene selected, and the Recall / Disabled switch to Disabled.
6. Recall Scene list – Displays the list of scenes created in the MP-M.
To Setup the Recall Conditions
a. Select one of the following: GPI 1 Open, GPI 1 Close, GPI 2 Open, or GPI 2 Close.
b. From the Recall Scene list, select a Scene to be recalled.
c. Set the Disabled / Recall switch to Recall.
TD-001578-01-A
GPI-1 GPI-2
1
2
3
6
46
Touch
Touch NPI
Menu
4
5