Output Zone - Music On Hold - QSC MP-M80 User Manual

Output − Music On Hold (MoH)
Touch Touch Touch
Outputs Music On Hold Setup
The MP-M has the ability to route an input signal to a
Music On Hold
dedicated Music on Hold output that can be connected to a
telephone system.
Note that the MoH output audio bandwidth has been
deliberately limited to reduce distortion that may occur
if excessive low-frequency signal is sent to a telephone
system.
1. Select Source – Touch a source from the from the
scrollable list.
1
2. Adjust the level control to the desired output level.
2
25
TD-001578-01-A