1.77
FAULT
Heavy wear on P.T.O.
shaft
Excessive hand brake
travel / poor braking
performance
Mower pulls to one side
under braking
TROUBLE SHOOTING
POSSIBLE CAUSE
Lack of lubrication
Insufficient overlap between shaft inner and
outer sections
Damage due to contact with tractor drawbar
pin
Worn brake shoes
Slack brake cables
Worn brake cylinder
Unbalanced cable adjustment
REMEDY
Re grease and repeat every 8 hours of work
Check and adjust the P.T.O. operating length,
refer to 'ATTACHING THE MOWER TO
THE TRACTOR'
Check and re adjust vertical alignment of
mower towbar
Adjust wheel brake shoes or replace as nec-
essary, refer to 'MAINTENANCE'
Re adjust brake cables, refer to 'MAINTE-
NANCE'
Replace cylinder
Re adjust brake cables, refer to 'COMMIS-
SIONING THE MOWER'
1.77