1.21
Running Gear
Tyres:
Tyre Pressure:
Wheel Nut Torque Setting:
Brakes:
Maximum Speed:
Cutterheads
Cutting Width:
Cylinder Diameter:
Cylinder Speed:
Height of Cut:
Number of Blades:
Smooth Rear Roller:
Smooth Front Roller:
Grooved Front Roller:
Configuration:
SPECIFICATIONS
245/70 'General'
2.2 bar (32 psi)
224Nm
Drum type, cable operated, hydraulic controlled or optional mechanical
overrun brakes with integral lever operated handbrake
Road traffic regulations limit the maximum speed of these machines to
40 km/hr (25 mph) TM5490 / TM7490
MK3 200 mm Cutterhead
762 mm (30˝)
200 mm (8˝)
1000 rpm approx
12 mm (0.5˝) to 80 mm (3˝)
4, 6, 8, 10
Standard
Optional
Optional
Fixed / Floating*
* TM5490 Only
1.21
MK3 254 mm Cutterhead
762 mm (30˝)
254 mm (10˝)
1000 rpm approx
12 mm (0.5˝) to 80 mm (3˝)
4, 6
Standard
-
-
Fixed