Table of Contents
Advertisement
1.59
Maintenance
WARNING: PREVENT ACCIDENTS - When
carrying out maintenance procedures it is es-
sential that:
-
The P.T.O drive is disengaged.
-
The tractor is in neutral.
-
The tractor parking brake is applied.
-
The engine is switched off.
-
The ignition key is removed.
-
The mower handbrake is applied.
-
The cutterheads are fully lowered to the
ground.
-
The hydraulic system pressure is fully
released.
-
The safety precautions listed in this manual
have been read and understood.
IMPORTANT: PREVENT DAMAGE - Regular
maintenance is essential for the continued safe
operation of the machine. Correct servicing will
prolong the working life of the machine and
safeguard the "Toro warranty". Always fit
genuine 'Toro service parts' as these are accu-
rately matched to the required duty.
Dirt and contamination are the enemies of any
hydraulic system. When carrying out maintenance
procedures on the hydraulic system always ensure
that the work area and the components are thor-
oughly clean before, during and after refitting.
Ensure that all open hydraulic lines and ports, etc.
are plugged during maintenance procedures.
The recommended service intervals are based on
normal operating conditions. Severe or unusual
conditions will necessitate shorter service intervals.
ALWAYS grease pivot points immediately after
pressure washing or steam cleaning, refer to
EVERY 50 HOURS, Grease pivot points.
WARNING: PREVENT ACCIDENTS - The
handbrake has a powerful spring assisted ac-
tion. Take care when operating.
MAINTENANCE
1.59
Advertisement
Table of Contents
