Bagging The Clippings; Side-Discharging The Clippings - Toro Flex Force Power System 20361 Operator's Manual

Bagging the Clippings

Use the grass bag when you want to collect grass and leaf clippings from the lawn.
If the side-discharge chute is on the machine, remove it; refer to
Installing the Grass Bag
1. Raise and hold up the rear deflector (A of
2. Install the grass bag, ensuring that the pins on the bag rest in the notches on the handle (B of
3. Lower the rear deflector.
Removing the Grass Bag
To remove the bag, reverse the steps in

Side-Discharging the Clippings

Use side discharging for cutting very tall grass.
If the grass bag is on the machine, remove it; refer to
Installing the Side-Discharge Chute
Lift up the side deflector and install the side-discharge chute (A and B
Removing the Side-Discharge Chute
To remove the side-discharge chute, lift up the side deflector, remove the side-discharge chute, and lower the
side-discharge deflector.
Figure 13).
Figure 13
Installing the Grass Bag (page
Removing the Grass Bag (page
Figure 14
14
Removing the Side-Discharge Chute (page
14).
14).
Figure 14).
14).
Figure 13).
g235812
g233435