During Operation; Starting The Machine; Shutting Off The Machine; Mulching The Clippings - Toro Flex Force Power System 20361 Operator's Manual

During Operation

Starting the Machine

1. Ensure that the battery pack is installed in the machine; refer to
2. Insert the electric-start button into the electric starter (A of
3. Press the electric-start button and keep it pressed (B of
4. Squeeze the blade-control bar and hold it to the handle until the motor starts (C of
Note:
When you squeeze the blade-control bar, the battery-charge indicator lights on the battery
illuminate.

Shutting Off the Machine

1. Release the blade-control bar (A of
2. Remove the electric-start button from the electric
starter (B of Figure
3. Remove the battery pack; refer to
Battery Pack from the Machine (page
Note:
Whenever you are not using the machine,
remove the battery pack.
Figure 12
Figure
12).
Removing the
15).
Installing the Battery Pack (page
Figure
Figure 11).
Figure 11

Mulching the Clippings

12).
Your machine comes from the factory ready to mulch
the grass and leaf clippings back into the lawn.
If the grass bag is on the machine, remove it before
mulching the clippings. Refer to
Bag (page 14).
g251286
13
11).
Figure
Removing the Grass
11).
11).
g284072