Before Operation; Installing The Battery Pack - Toro Flex Force Power System 20361 Operator's Manual

Operation
Note:
Determine the left and right sides of the machine from the normal operating position.

Before Operation

Installing the Battery Pack

Important:
Operate the battery pack only in temperatures that are within the appropriate range; refer
to Specifications (page
1. Make sure that the vents on the battery are clear of any dust and debris.
2. Lift up the battery-compartment lid (A of
3. Line up the cavity in the battery pack with the tongue on the machine and slide the battery pack into the
compartment until it locks into place (B of
4. Close the battery-compartment lid (C of
10).
Figure
Figure
8).
Figure 8).
8).
Figure 8
11
g274513