Setup; Mounting The Battery Charger (Optional) - Toro Flex Force Power System 20361 Operator's Manual

Setup

Important:
To prevent accidental starting,
do not insert the electric-start button into the
electric-start ignition (if equipped) until you are
ready to start the motor.
Note:
The battery pack is not fully charged when it
is purchased. Before using the machine for the first
time, refer to Charging the Battery Pack (page 15).
1
Mounting the Battery
Charger (Optional)
No Parts Required
g247359
Figure 2
Procedure
If desired, mount the battery charger securely on a
wall using the wall-mount key holes on the back of
the charger.
Mount it indoors (such as a garage or other dry place),
near a power outlet, and out of the reach of children.
Refer to Figure 2 for assistance in mounting the
charger.
Slide the charger over the appropriately positioned
hardware to secure the charger in place (hardware
not included).
8