Installation Precautions - Toshiba 1600XPi Series Installation And Operation Manual

Single phase - 3.6/5.2/6/8/10/14/18/22 kva
Hide thumbs Also See for 1600XPi Series:
Table of Contents

Advertisement

5

Installation Precautions

1. Observe the following environmental restrictions:
Install the unit in a well-ventilated location; allow at least 4 inches (10 cm) on all sides for air ventilation and for
maintenance.
Install the unit where the ambient temperature is within the range specified in Appendix A -
DO NOT install the UPS in areas that are subject to high humidity.
DO NOT install the UPS in areas that allow exposure to direct sunlight.
DO NOT install the UPS in areas that allow exposure to high levels of airborne dust, metal particles, or flammable
gases.
DO NOT install the UPS in areas near sources of electrical noise. Ensuring a proper earth ground will reduce the
effects of electrical noise and will reduce the potential for electrical shock.
DO NOT install the UPS in areas that would allow fluids or any foreign object to get inside the UPS.
2. UPS is intended for permanent installation only. Install the unit in a stable, level and upright position that is free of
excessive vibration.
3. Follow the instructions on the unpacking label affixed to the exterior of the UPS.
4. Retain the shipping rails for use as permanent mounting of the UPS.
1600XPi Series UPS Installation and Operation Manual – 60616-014
fig 1
1
3
NOTICE
2
fig 2
Unpacking Instructions
"Specifications".
P/N 48537
9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents