Toshiba 1600XPi Series Installation And Operation Manual page 87

Unit (Capacity)
Buzzer Volume
Power Connections
Remote Contacts
RS232 ASCII Interface
RemotEye 4
(Standard with XPi)
(Optional with XP)
Mechanical Design
Topology
Size (HxWxD) (max)
Paint System
Fan Panel
2
Battery System
Battery Replacement
Battery Packs
Battery Pack Size
(HxWxD) max.
Battery Pack Quantity
Battery Type
Toshiba's Part Number for Battery Pack
1. Input/output figures rated for 240 volts unless otherwise stated. Output ratings given for 0.85PF are only valid when the input voltage
is greater than 204 volts; otherwise, ratings given for 0.70PF are applicable.
2. Remove all sources of main AC power and wait five minutes before replacing fans.
1600XPi Series UPS Installation and Operation Manual – 60616-014
NON–STANDARD MODELS: 5.2 KVA (CONT'D)
Standard – Hard wire, Optional – Receptacle Panel w/ Power Cord
Remote communications package (HTTP/HTTPS, SNMP, Modbus TCP/RTU, BACnet
Unit enclosure is made from sheet metal meeting NEMA1 and UL Type 1
Panel mounted on back of UPS to allow for easy replacement of fans
Slide out battery packs accessible from front of UPS. Factory or authorized service
Designed for battery acid leakage containment with six (6) batteries per pack
5.2kVA (4.4 kW)
Standard (Fixed Volume)
Standard (INV, BYP, BATT, LB, AC, FLT)
Toshiba UPS Communication Protocol 2.0
IP/MSTP) via RJ-45 or RS-485
27.5 x 10 x 34 in.
(699 x 254 x 864 mm)
Powder coating
center serviceable only.
5.0 x 7.3 x 19.0 in.
(127 x 185 x 483 mm)
3
Lead Acid 9AH/12V (FR)
51896-FS
1
A9