10
Installing the CE Guard Kit
EU Only
Parts needed for this procedure:
CE Guard Kit (Model No. 04442—purchase
1
separately)
Procedure
This machine complies with EN ISO 5395:2013 when
you equip it with the CE Guard Kit (Model No. 04442).
11
Reducing the Tire Pressure
No Parts Required
Procedure
The tires are over-inflated at the factory for shipping
purposes. Reduce the pressure to the proper levels
before starting the machine. Refer to
Tire Pressure (page
33).
12
Burnishing the Brakes
No Parts Required
Procedure
Firmly apply the brakes and drive the machine at
mowing speed until the brakes are hot, as indicated
by their smell. You may need to adjust the brakes
after the break-in period; refer to
(page
36).
Checking the
Adjusting the Brakes
14
Product Overview
1. Engine
2. Roll bar
3. Control panel
4. Seat
Controls
Traction Pedal
The traction pedal
(Figure
to make the machine move forward, to move it
backward, and to stop the machine. Press the top
of the pedal to move forward and the bottom of the
pedal to move backward or to assist in stopping when
moving forward. Also, allow the pedal to move to the
neutral position to stop the machine. For operator
comfort, do not rest the heel of your foot on reverse
when operating forward
Figure 9
5. Steering wheel
6. Traction pedal
7. Foot rest
8. Reels with grass baskets
10) has 3 functions:
(Figure
11).
g014674