Connecting To An Email Server - Siemens SENTRON 7KN POWERCENTER 3000 Manual

Functions
5.7 Notification of exceptional situations
5.7.2

Connecting to an email server

Messages can be acquired with 7KN Powercenter 3000 (see Messages (Page 49)). These
messages can be forwarded by email.
For this purpose, 7KN Powercenter 3000 must be set up as a mail client for a mail server.
This can be done either with powerconfig or in the web user interface under "Settings →
General → Email".
If an email server is used that requires both username and password, e.g. gmx or yahoo, the
setup can be done only via the web user interface for security reasons.
On completion of setup or commissioning, a test email can be sent to test the settings.
76
7KN POWERCENTER 3000
Equipment Manual, 07/2020, L1V30579222003-03