Periodic Export Of Energy Data For Iso 50001 - Siemens SENTRON 7KN POWERCENTER 3000 Manual

1. Select the relevant time period
2. Select the desired export format, zip or directly csv.
3. Select the desired export by email or direct data storage.
If sent by email, the zip or csv file is sent as an attachment to the email address defined
under "Settings → General → Email" as soon as it has been generated.
The required file is created by export generation. With download export, the selectable file is
stored in a selectable path.
Note
• Generation of the export file can take a few minutes.
• The generated export files are retained for up to approx. 8 hours in
7KN Powercenter 3000. This means that the download export can be performed for up to
8 hours after generation. After that time, the generated data are automatically deleted.
5.3.3

Periodic export of energy data for ISO 50001

7KN Powercenter 3000 provides the possibility of exporting energy data (recorded every 15
minutes) periodically from all connected devices.
Benefits:
• Energy management according to ISO 50001 requires regular analysis of the energy
consumption.
• The more frequent the analysis, the more precise the measures that can be taken.
• With 7KN Powercenter 3000, the energy counters of all connected devices can be
exported in defined cycles.
Under "Settings → General → Periodic energy data exports", up to 8 jobs can be created that
export energy data periodically. The energy data are generated as csv files, packed as zip files
and attached to an email as an attachment.
The energy data are sent to the email address defined under "Settings → General → Email".
The time zone and language can be set under "Settings → Miscellaneous".
7KN POWERCENTER 3000
Equipment Manual, 07/2020, L1V30579222003-03
Functions
5.3 Exporting recorded data
55