Modifications In Smart Assembly Networks - Siemens SENTRON 7KN POWERCENTER 3000 Manual

8.4

Modifications in smart assembly networks

In smart assembly networks, devices can be added and deleted, and communication
parameters can be modified.
Note
After adding or deleting devices or after modifying the communication parameters ①, the
setup file must be saved in powerconfig and updated in 7KN Powercenter 3000 ②.
Otherwise, the devices cannot be accessed in the smart assembly network or are reported as
faulty.
7KN POWERCENTER 3000
Equipment Manual, 07/2020, L1V30579222003-03
8.4 Modifications in smart assembly networks
FAQs
121