Special Aspects Of Powerconfig V3.15 - Siemens SENTRON 7KN POWERCENTER 3000 Manual

FAQs

8.3 Special aspects of powerconfig V3.15

It is however not possible to reset 7KN Powercenter 3000 V1.0 with powerconfig V3.14 via
the device menu.
In this case, this must be done via the Web user interface "Settings → Actions".
8.3 Special aspects of powerconfig V3.15
For powerconfig V3.15, the following functions are restricted:
1. It is only possible to set the parameters of the MQTT services (see chapter Cloud service with
MQTT (Page 68)) via the web user interface.
2. The firmware update is only possible via the web user interface (see chapter Firmware
update (Page 113)).
See also
Modbus devices (Page 81)
120
7KN POWERCENTER 3000
Equipment Manual, 07/2020, L1V30579222003-03