Connecting 7Kn Powercenter 3000 To The Cloud - Siemens SENTRON 7KN POWERCENTER 3000 Manual

Functions
5.6 Cloud service with MQTT
5.6.2

Connecting 7KN POWERCENTER 3000 to the cloud

Parameter settings are made via the web user interface "Settings → Cloud → MQTT".
In the upper part, the parameters relating to communication are set.
Including:
• Starting the MQTT service
• The name of the broker is cloud-specific:
– Microsoft Azure: "{iothubhostname}", depending on the name of the IoT hub that the
– AWS: e.g. "az2timzd5iqx8my-ats.iot.eu-central-1.amazonaws.com", in this case the
In the middle part, the parameters relevant to identification and security, incl. the certificates
required for encryption, are defined.
70
user has created.
name is not freely selectable (at the beginning).
7KN POWERCENTER 3000
Equipment Manual, 07/2020, L1V30579222003-03