Wall Mounting - Siemens SENTRON 7KN POWERCENTER 3000 Manual

4.1.3.3

Wall mounting

The wall mounting is suitable for horizontal mounting of the device.
Requirements
• Mounting bracket
Note
Use only the screws supplied to mount the mounting bracket. Longer screws can damage
the interior of the device
• A T10 screwdriver
• Two wall plugs and two screws
Procedure – mounting
7KN POWERCENTER 3000
Equipment Manual, 07/2020, L1V30579222003-03
Installing, connecting, commissioning
1. Mark out the mounting holes on the mounting
surface.
2. Drill the mounting holes.
3. Place the wall plugs in the drilled holes.
4. Place the mounting bracket on the rear of the de-
vice. Pay attention to the orientation of the key-
holes in the mounting bracket.
5. Fasten the mounting bracket with the 4 screws
supplied.
6. Place the device with the mounting bracket onto
the mounting surface.
7. Screw the device on.
4.1 Preparing installation
25