Connecting The Gigaset Usb Stick 108 - Siemens Gigaset USB Stick 108 Manual

Installing the Gigaset USB Stick 108
ì
Click on Next to continue installation.
The licence agreement screen now appears.
ì
If you wish to accept the terms of the licence agreement, click on Yes.
In the next screen, choose the directory for the installation.
ì
Click on Browse, if you want to select another directory. Click on Next to continue
installation.
During installation, the InstallShield Wizard uses the screen Setup progress to show
which action is being carried out, and the progress is also displayed.
After this stage of installation is completed, a message appears prompting you to
connect the Gigaset USB Stick 108 to your PC.

Connecting the Gigaset USB Stick 108

ì
Remove the cap from your Gigaset USB Stick 108 and insert it in a free USB port on
your PC.
Note:
The Gigaset USB Stick 108 complies with USB Version 2.0.
If your PC still has the older USB Version 1.1, you may see an error message to that
effect during installation. You can ignore this message. The Gigaset USB Stick 108
also works with USB Version 1.1. However, the transmission rate under USB V1.1 is
lower.
10