Siemens SENTRON 7KN POWERCENTER 3000 Manual page 31

NOTICE
Fault due to peripheral devices/USB V3.0 devices
Connection of peripheral devices can result in faults on the device.
This can result in personal injury and damage to the machine or plant.
Note the following when connecting peripheral devices/USB V3.0 devices:
• Read the documentation of the peripheral devices/USB V3.0 devices. Follow the
• Connect only peripheral devices that are suitable for industrial use in accordance with
• Peripheral devices that are not hotplug-capable must only be connected when the power
NOTICE
Damage due to power feedback
Power feedback of voltage to ground through a connected or installed component can
damage the device.
Connected or installed peripheral devices, e.g. a USB drive, must not introduce voltage into
the device. Power feedback is not permissible at all.
7KN POWERCENTER 3000
Equipment Manual, 07/2020, L1V30579222003-03
instructions in the documentation.
EN 61000-6-2 and IEC 61000-6-2.
supply of the device is switched off.
Installing, connecting, commissioning
4.3 Connecting the device
29