Report Printer; Remote Printer (Kp#1 Through Kp#9) - Sharp UP-3301 Instruction Manual

I Slip printer (continued)
I Report printer
Procedure
I Remote printer (KP#1 through KP#9)
Procedure
• VP PRINT TIMES (Use the numeric entry)
Number of times of validation printing (0 to 9)
• HEAD LOGO PRINT (Use the selective entry)
Select a header logo print timing.
EACH ISSUE: The logo will be printed on the slip just after
the current transaction is finalized.
PRE-PRINT: The logo will be printed beforehand on the
next slip when the current transaction is
finalized.
Program each item as follows:
• TERMINAL# (Use the numeric entry)
Terminal number (1 through 254 : Enter "0" for local device.)
• CHANNEL# (Use the numeric entry)
Channel number (1 through 7)
When you program as "0", no RS-232 channel is assigned.
• PRINTER NAME (Use the selective entry)
Select the printer to be used.
ER-01PU
TM-U210/230
TM-T88/85/88(3)
TM-T88(3) + LOGO
• AUTO CUTTER (Use the selective entry)
Auto cutter function
YES: Enables auto cutter function.
NO: Disables auto cutter function.
• PAPER SHEET (Use the selective entry)
Select a paper type.
TWO OR MORE:
ONE SHEET:
This option is available when the "TM-300" is selected.
NOTE
Program each item as follows:
• TERMINAL# (Use the numeric entry)
Terminal number (1 through 254 : Enter "0" for local device.)
• CHANNEL# (Use the numeric entry)
Channel number (1 through 7)
When you program as "0", no RS-232 channel is assigned.
• PRINTER NAME (Use the selective entry)
Select the printer to be used.
ER-01PU
TM-U210/230
TM-T88/85/88(3)
UP-T80BP
TM-300
TM-U950
Uses two or more sheets.
Uses one sheet.
UP-T80BP
TM-300
TM-U950
209