Device Configuration Programming; Built-In Printer - Sharp ER-A280F Instruction Manual

Device Configuration Programming

Use the following procedure to select a device configuration programming:
Procedure
M
The following illustration shows those options included in this programming group.
13 DEVICE CONFIG
I Built-in printer
Procedure
1.
In the SETTING window, select "13 DEVICE CONFIG".
• The DEVICE CONFIG window will appear.
2.
Select any option from the following options list:

1 BUILT-IN PRINTER

2 BCR(SCANNER)
3 ONLINE
4 CONTROL UNIT
1 BUILT-IN PRINTER
2 BCR(SCANNER)
3 ONLINE
4 CONTROL UNIT
Program each item as follows:
• LIGHT&SHADE (Use the numeric entry)
Select a light and shade level. (00 to 99)
00: 89% for standard
50: 100% <standard>
99: 110% for standard
• IMAGE FOOTER (Use the selective entry)
PRINT:
NOT PRINT: Not print footer graphic logo.
• DIFF ST FEED
Difference subtotal feed line (0 to 9)
➡
See "Built-in printer" on page 145.
➡
See "Scanner" on page 146.
➡
See "On-line" on page 146.
➡
See "Control unit" on page 146.
Prints footer graphic logo.
Built-in printer
Scanner
On-line
Control unit
145