Personnel Programming; Clerk - Sharp XE-A207W Full Detailed Instruction Manual

Personnel Programming
Use the following procedure to select any option included in the personnel group:
Procedure
The following illustration shows those options included in this programming group.
5 PERSONAL
■ Clerk
Procedure
The screen continues.
1.
In the SETTING window, select "5 PERSONNEL."
2.
Select any option from the following options list.

1 CLERK

2 MANAGER
3 MODE PASS CODE
4 TRAINING CLK
Program each item as follows:
• PASS CODE (Use the numeric entry)
Pass code (max. 4 digits: 0001 to 9999/0000)
• TEXT (Use the character entry)
Description for the clerk name (Up to 16 characters can be
entered.)
• AUTO KEY (Use the selective entry)
DISABLE: Disables operation in the AUTO KEY mode.
ENABLE: Enables operation in the AUTO KEY mode.
• The PERSONNEL window will appear.
1 CLERK
2 MANAGER
3 MODE PASS CODE
4 TRAINING CLK
l
See "Clerk" this page.
l
See "Manager" on page 83.
l
See "MODE PASS CODE" on page 83.
l
See "TRAINING CLK" on page 84.
82
Clerk
Manager
Mode pass code
Training Clerk