Cs1 And C200Hx/C200Hg/C200He/C200Hs/C200H B7A Interface Units - Omron B7A Manual

B7A

CS1 and C200HX/C200HG/C200HE/C200HS/C200H B7A Interface Units

16-point Input (Transmission)
Models
Screw terminal model
(32 points)
B7AS
Screw terminal model
(16 output points)
B7A
B7AS
Modular model (16 points)
B7A
Hybrid IC model (16 points)
B7AH
PLC connector model
(16 points)
B7A
PLC connector model
(32 points)
B7A
Note: Use combinations of B7A Interface Units and B7A LInk Terminals with the same I/O delay time. The I/O delay time (high speed:
typically 3 ms; normal speed: typically 19.2 ms) can be switched for B7A Interface Units (except for C200H-B7AI1 and
C200H-B7AO1) and 32-point B7A screw terminal models using a selection switch. Set the same I/O delay time for connected
Units.
CS1/C200H Series
Input/output model
C200H-B7A22
(32 input and 32 output points)
C200H-B7A21
(16 input and 16 output points)
Input model
C200H-B7A12 (32 inputs) C200H-B7A02 (32 outputs)
C200H-B7AI1 (16 inputs) C200H-B7AO1 (16 outputs)
Note: Two 16-type models can be used to connect
to 32-point models.
Output model
B7A
16-point Output
(Reception) Models
Screw terminal model
(16 points)
B7A
B7AS
Relay-mounted screw terminal
model (16 points)
G70D-R6 1-B7A
Note: Only the normal I/O delay
time (typically 19.2 ms) is
available.
Modular model (16 points)
B7A
Hybrid IC model (16 points)
B7AH
PLC connector model
(16 points)
B7A
PLC connector model
(32 points)
B7A
5