Omron B7A Manual page 62

B7AM-8j
Nomenclature
Power supply/
error indicator
Indicator Operation
Indicator
POWER/ERR G Lit when power is supplied and the
Terminal is operating without error.
R Lit during transmission errors
(SIG2).
N Not lit when power is not supplied.
I/O O Lit when the input signals are ON.
N Not lit when the signals are OFF.
Note: G: Green indicator lit; R: Red indicator lit;
O: Orange indicator lit; N: Not lit
Functions
Display
NPN NPN 0.1A 0 1A
60
Power Input
terminals transmission path
Transmission terminals
Power terminals
Function
I/O configuration
Indicates the compatible transistor type.
Output current
Indicates the rated output current value of the B7A per point.
I/O delay time
Indicates the typical I/O delay time of the B7A. Use a combination of an Input and
Output Link Terminal with the same I/O delay time.
Input terminals
Input indicators
Functions
Output indicators
Output terminals
Recommended Solderless Terminals
Wire
2
0.75 mm (AWG#18) RAV 1.25 to 3.5 (vinyl-insulated round
wire) or RAP 1 25 to 3 5 wire) or RAP 1.25 to 3.5
2
1.25 mm (AWG#16)
(nylon-insulated round wire)
Description
B7AM-8j
JIS specifications