Omron B7A Manual page 47

G70D-B7A
General
G70D-R6R 1-B7A (Relay Outputs)
Item
Contacts
Contact mechanism
Contact material
Contact resistance (See note 1.)
Operating time
Release time
Maximum switching frequency a u s c g eque cy
Insulation resistance
Dielectric strength
Noise immunity
Vibration resistance
S oc Shock resistance es s a ce
Operating voltage range
Current consumption (See note 2.)
Cable length (between Unit and connected device)
Color of indicators
Coil surge suppressor
Ambient temperature
Ambient humidity
Mounting strength
Terminal strength
Weight
Note: 1. The values above are for the Terminal in its initial state.
2. The contact resistance given is for 1 A at 5 VDC.
3. The value given for current consumption is for when all points are ON and includes the relay coil current for the G6D. It does not
include the current for external loads or error output.
16 SPST-NO contacts
Single
Agco
100 mΩ max.
10 ms max.
10 ms max.
Mechanical 18,000 operations/hour
Rated load 1,800 operations/hour
100 MΩ min. (500 V)
1,000 VAC, 1 min between each terminal and external parts
Power supply normal:
Power supply common:
Transmission path wrapping: 1.5 kV, 10 min; pulse width: 100 ns to 1 µs
Link Terminal wrapping:
Destruction 10 to 55 Hz, 1.0-mm double amplitude for 2 hours each in X, Y, and Z
directions
Malfunction 10 to 55 Hz, 0.75-mm double amplitude for 2 hours each in X, Y, and Z
directions
2
Destruction 300 m/s
2
Malfunction 100 m/s
+10%
24 VDC /
24 VDC, approx. 300 mA
Depends on the load
Operation indicator: orange
Power supply indicator: green (red for errors)
Diode (400 V, 300 mA)
Operating: 0 to 55 C
Storage: –20 to 65 C
Operating: 35% to 85%
No damage when 49-N pull is applied for 1 s each in all directions (only 9.8-N
pull in direction of DIN track)
Tightening strength: 0.78 to 0.98 N m
Tensile strength: 49 N for 1 minute
Approx. 230 g
Specification
600 V, 10 min; pulse width: 100 ns to 1 µs
1.5 kV, 10 min; pulse width: 100 ns to 1 µs
600 V, 10 min; pulse width: 100 ns to 1 µs
–15%
G70D-B7A
45