Omron B7A Manual page 55

B7AM-6BS
Nomenclature
Transmission
terminal
Power supply/
error indicator
Selector switch
Transmission
terminal
Indicator Operation
Indicator
POWER/ERR G Lit when power is supplied and the
Terminal is operating without error.
R Lit during transmission errors
(SIG2).
N Not lit when power is not supplied.
I/O O Lit when the input signals are ON.
N Not lit when the signals are OFF.
Note: G: Green indicator lit; R: Red indicator lit;
O: Orange indicator lit; N: Not lit
Settings of Selector Switch
I/O delay selector switch
3 ms
HIgh speed: (typical 3 ms)
Note: Default settings are 19.2 ms and LOAD OFF.
Power terminals
Power terminals
Function
19.2 ms
Normal speed: (typical 19.2 ms)
Input terminals
Output terminals
Recommended Solderless Terminals
Wire
2
RAV 1.25 to 3.5 (vinyl-insulated round
0.75 mm (AWG#18)
wire) or RAP 1 25 to 3 5 wire) or RAP 1.25 to 3.5
2
1.25 mm (AWG#16)
(nylon-insulated round wire)
Error processing selector switch
HOLD
When an error occurs, the
output holds the state that
existed right before the error
occurred.
B7AM-6BS
Input indicators
Output indicators
JIS specifications
LOAD OFF
When an error occurs, the
output shuts off everything.
53