Omron B7A Manual page 15

B7AS
Nomenclature
Transmission terminals
Power supply indicator
I/O delay selector switch
Transmission terminals
Recommended Solderless Terminals
Wire
2
0.75 mm (AWG#18) RAV 1.25 to 3.5 (vinyl-insulated round
wire) or RAP 1.25 to 3.5 wire) or RAP 1 25 to 3 5
2
1.25 mm (AWG#16)
(nylon-insulated round wire)
I/O Delay Selector Switch
Power terminals
Power terminals
JIS specifications
Input terminals
Input terminals
Indicator Operation
Indicator
POWER G Lit when power is supplied and the
(input side) Terminal is operating.
N Not lit when power is not supplied.
Input indicator O Lit when the input signals are ON.
N Not lit when the signals are OFF.
Note: G: Green indicator lit; O: Orange indicator lit; N: Not lit
I/O delay selector switch
3 ms
High speed (typical: 3 ms)
Note: Set the I/O delay time to the same setting as the Output
Unit. The factory setting is 19.2 ms.
B7AS
Input indicators
Function
19.2 ms
Normal speed (typical: 19.2 ms)
13