Planar UltraRes X Series User Manual page 66

IR Remote Lock
•
Lock or unlock the remote control. When it is enabled, all remote control presses will be
ignored.
•
Options: Enable, Disable; Default: Disable
IR Remote ID Code
•
Selects the IR remote code set accepted by the display
•
Options: 00000-65535; Default: 01785
Save All Settings to USB
•
Save all settings in the display to a USB flash drive. The saved file will be named Planar-
settings.bin and will be saved in the root folder of the USB flash drive.
•
Note: A USB flash drive must be inserted into the USB-A connector prior to using this
feature. The USB flash drive must be formatted as FAT32. This feature will not work with
the NTFS file system.
Restore All Settings from USB
•
Restores all settings in the display from a USB flash drive. The settings file must be
named Planar-settings.bin and must be located in the root folder of the USB flash drive.
•
Note: A USB flash drive must be inserted into the USB-A connector prior to using this
feature. The USB flash drive must be formatted as FAT32. This feature will not work with
the NTFS file system.
Save Diagnostics to USB
•
Save a diagnostic report to a USB flash drive to help Planar Technical Support
troubleshoot any issues. The saved file will be named Planar-diagnostics.bin and will be
saved in the root folder of the USB flash drive.
•
Note: A USB flash drive must be inserted into the USB-A connector prior to using this
feature. The USB flash drive must be formatted as FAT32. This feature will not work with
the NTFS file system.
Factory Reset
•
Return the saved settings in a system to their factory defaults
Firmware Update
•
Update the firmware for the display. Refer to the instructions on the firmware release
package for more information.
Planar UltraRes X Series User Manual
020-1396-00A
66
Page | 66