Planar UltraRes X Series User Manual page 42

Red Offset
•
Adjust the red offset of the image
•
Range: 0~100; Default: 50
Green Offset
•
Adjust the green offset of the image
•
Range: 0~100; Default: 50
Blue Offset
•
Adjust the blue offset of the image
•
Range: 0~100; Default: 50
Gamma
•
Set the gamma of the image
•
Options: 1.5, 1.55, 1.6, 1.65, 1.7, 1.75, 1.8, 1.85, 1.9, 1.95, 2.0, 2.05, 2.1, 2.15, 2.2, 2.25,
2.3, 2.35, 2.4, 2.45, 2.5, 2.55, 2.6, 2.65, 2.7, 2.75, 2.8
•
Default: 2.2
Content Rotation
•
Rotate the image on the display
•
Options: None, 90, 180, 270; Default: None
Aspect Ratio
•
Set how the source is treated when the aspect ratio of the input is different than the aspect
ratio of the zone it is in. If the image does not fill the zone completely, the extra margins
are black.
•
Options: Auto, 16:9, 4:3, Fill Screen, Native, Letterbox; Default: Auto
Overscan
•
Set the percentage of the image to remove from each edge
•
Range: 0~20; Default: 0
Image Position
•
Move the image horizontally or vertically. The amount to move is measured in input pixels.
•
Range: -1000~1000; Default: 0
Revert to Defaults
•
Reset all settings in the Image Adjust menu to their factory defaults for the current zone
only
Planar UltraRes X Series User Manual
020-1396-00A
42
Page | 42