Set Date and Time
•
Set the internal system clock. If Use Network Time is unchecked, you can set the following
settings individually: Time Zone, Year, Month, Day, Date, Hour, and Minute.
•
Note: If Use Network Time is checked and DHCP is unchecked, the display will be unable
to obtain the network time unless a DNS server is programmed. This is done via the DNS
Server setting in the Network menu or the serial command interface.
Set Event 1~Event 20
•
Event Enabled: Turns on the event. If disabled, the settings are saved so that the event
can be re-enabled.
•
Frequency: The frequency of the event. Options are Daily, Weekly, Weekdays,
Weekends.
•
Action: The action to take for the event. Options are Turn On, Turn Off, Recall, Panel
Brightness.
•
Data: The preset to recall when the Action is set to Recall, or the backlight setting when
the Action is set to Panel Brightness.
Planar UltraRes X Series User Manual
020-1396-00A
51
Page | 51