Planar UltraRes X Series User Manual page 65

•
Off: The display force all content to be displayed in SDR mode.
•
Note: When viewing HDR content in this mode, the image quality will not have the
correct appearance.
•
Note: Due to the performance requirements of HDR, simultaneous viewing HDR
and SDR content image appearance will be prioritized based on Zone 1 settings.
CEC Enable
•
Enables HDMI-CEC (Consumer Electronics Control) with compatible external devices
•
Options: On, Off: Default: Off
The CEC commands listed in the table below are implemented:
Command
Image View On
Text View On
Standby
Routing Change
Active Source
Give Physical Address
Report Physical Address
Request Active Source
Set Stream Path
Give Device Power Status
Report Power Status
Inactive Source
CEC Version
Get CEC Version
Give Features
Report Features
MEMC
•
Enable motion estimation motion compensation (frame interpolation). This improves
smoothness for fast motion video content.
•
Options: Off, Low, Medium, High; Default: Off
DisplayPort Type
•
Set the version of DisplayPort that is used by the system
•
Options: 1.1, 1.2; Default: 1.2
Keypad Lock
•
Lock or unlock the keypad. When it is enabled, all keypad presses will be ignored.
•
Options: Enable, Disable; Default: Disable
Planar UltraRes X Series User Manual
020-1396-00A
65
Value
0x04
0x0D
0x36
0x80
0x82
0x83
0x84
0x85
0x86
0x8F
0x90
0x9D
0x9E
0x9F
0xA5
0xA6
Page | 65