The Tool Movement Range; For Modela Player Ver. 3 - Roland MODELA Pro ZCL-650A User Manual

Part 6 Cutting Using MODELA Player ver. 3
6-2. The Tool Movement Range for MODELA Player ver. 3
Set the cutting area so that the tool
does not contact the rotary axis unit
or the like.
Pieces of the tool or workpiece may fly off,
resulting in injury.
The tool movement range during cutting is determined by the cutting-start location, the object size set at the [Set the Dimension] screen,
and the setting for maximum cutting depth (see the figures below). Refer to these when you are making sure there is no interference
between the tool and the spindle.
For more information about how to make the setting for the cutting-start location and the like, refer to "6-5. Operation of MODELA
Player ver. 3" later in this part.
Workpiece
Workpiece
24
Tool movement range
Tool
Cutting-start location (X-Y)
Tool
Object size
Cutting-start location (Z)
Object size
Surfacing depth
Maximum cutting depth of
the first surface