Table of Contents
Advertisement
To Ensure Safe Use
About
About the Symbols
The
the symbol is determined by the design contained within the triangle. The symbol at left means
"danger of electrocution."
The
specific thing that must not be done is indicated by the design contained within the circle. The
symbol at left means the unit must never be disassembled.
The
be done is indicated by the design contained within the circle. The symbol at left means the
power-cord plug must be unplugged from the outlet.
Do not disassemble, repair, or
modify.
Doing so may lead to fire or abnormal
operation resulting in injury.
Fasten the spindle, tool, and material
securely in place.
Otherwise they may come loose during
cutting, resulting in injury.
Do not wear gloves, a necktie or
wide-sleeved clothing.
They may become caught in the tool,
resulting in injury.
2
and
Used for instructions intended to alert the user to the risk of death or severe
injury should the unit be used improperly.
Used for instructions intended to alert the user to the risk of injury or material
damage should the unit be used improperly.
* Material damage refers to damage or other adverse effects caused with
respect to the home and all its furnishings, as well to domestic animals or
pets.
symbol alerts the user to important instructions or warnings. The specific meaning of
symbol alerts the user to items that must never be carried out (are forbidden). The
symbol alerts the user to things that must be carried out. The specific thing that must
Notices
Do not use while in an abnormal
state (i.e., emitting smoke, burning
odor, unusual noise, or the like).
Doing so may result in fire or
electrical shock.
Immediately switch off the power, unplug
the power cord from the electrical outlet,
and contact your authorized Roland DG
Corp. dealer or service center.
Do not insert the fingers between the
rotary axis unit and the material.
The fingers may be pinched, resulting in
injury.
Set the cutting area so that the tool
does not contact the rotary axis unit
or the like.
Pieces of the tool or workpiece may fly off,
resulting in injury.
Advertisement
Table of Contents
