Reference Manual
00809-0100-4408
5. Tighten bolts and nuts with sufficient torque for the flange and gasket choice.
6. Connect the air purging system. Use thread sealant or suitable gasket according to
Postrequisites
Align the transmitter head (see
Rosemount 5408 and 5408:SIS Level Transmitters
A. 1.0 in. (25.5 mm)
your site procedures.
A. G⅜-in.
B. 0.4 in. (10 mm)
Table 3-8: Incoming Air Supply Specification
Maximum pressure
190 psi (13 bar)
or
Recommended pressure
100 to 115 psi (7 to 8 bar)
Align transmitter
head).
Mechanical installation
February 2020
39