Toshiba PORTEGE R400 Maintenance Manual page 293

4 Replacement Procedures
4.28 Fingerprint sensor board
Removing the Fingerprint sensor board
The following describes the procedure for removing the fingerprint sensor board.
(See Figure 4-46.)
1. Open the latches and remove the fingerprint sensor board.
2. Disconnect the fingerprint sensor cable from the connector CN9670 on the
fingerprint sensor board.
CN9670
Fingerprint
sensor cable
Figure 4-46 Removing the fingerprint sensor board
Installing the Fingerprint sensor board
The following describes the procedure for installing the fingerprint sensor board.
(See Figure 4-46.)
1. Connect the fingerprint sensor cable to the connector CN9670 on the fingerprint
sensor board.
2. Open the latches and install the fingerprint sensor board.
4-74 [CONFIDENTIAL]
Fingerprint sensor board
Latch
PORTÉGÉ R400 Maintenance Manual (960-623)
4.28 Fingerprint sensor board
Latch